World Library  
Flag as Inappropriate
Email this Article

Frameless construction

Article Id: WHEBN0007271480
Reproduction Date:

Title: Frameless construction  
Author: World Heritage Encyclopedia
Language: English
Subject: ER9 electric trainset, Woodworking, Butterfly joint, Panel saw, Plywood saw
Collection: Woodworking
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Frameless construction

A frameless cabinet
Frameless construction

in cabinetmaking refers to the construction of cabinets using flat panels of engineered wood — usually particle board, plywood or medium-density fibreboard — rather than the traditional frame and panel construction.

A common construction method for frameless cabinets originated in Europe after World War II and is known as the 32 mm Method or 32 mm System.[1] This nomenclature is derived from the 32-millimetre spacing between the system holes used for construction and installation of hardware typically used for doors, drawers and shelves. In North America it is also often referred to as "European Cabinetry" popular due to its simplicity of construction, clean lines and low cost.

With frameless cabinets, thicker sides (boxes) keep the cabinet much more stable and avoids the use of a front frame, such as found in face-frame cabinets. By eliminating the front frame, you can have more room to get large objects inside with more usable space. Citation; Frameless (full-access) cabinets allow for better access and add to the height and width of doors and drawer openings within the same footprint of a comparable framed cabinet. In addition to thicker sides, the frameless cabinet also relies on a thicker back that is typically dadoed into the sides to give the box added strength and adds protection from pests and rodents. It is important to note that most of the cost of cabinets is determined by the type of doors, hinges, drawers, and slides that are used. When the added costs of specialized machinery to manufacture frameless cabinets is compared to the costs of added wood for a face frame, it can be a "wash" on the costs.

See also

References

  1. ^ Christ, Jim (1990). European Cabinetry: Design & Construction. New York: Sterling Publishing Co. Ltd.  


This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.