World Library  
Flag as Inappropriate
Email this Article

Chainsaw mill

Article Id: WHEBN0030738595
Reproduction Date:

Title: Chainsaw mill  
Author: World Heritage Encyclopedia
Language: English
Subject: Woodworking, Two-man saw, Wood, Sawmill technology, Chainsaws
Collection: Chainsaws, Sawmill Technology, Timber Preparation, Woodworking Tools
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Chainsaw mill

An Alaskan chainsaw mill

An Alaskan mill[1] or chainsaw mill[2] is a type of sawmill that is used by one or two operators to mill logs into lumber for use in furniture, construction and other uses.

The mill attachment consists of a pair of rails which are attached to bar of the chainsaw. The rails ride on a plank and then a previously cut surface and guide the chainsaw blade through the log at a consistent depth so that planks of a predetermined thickness are cut. The distance between the rails and the bar determines this thickness and it can be adjusted by moving the rails along a post at each end of the mill attachment.

Small mills use a single chainsaw and can be handled by a single operator. Larger mills use two chainsaws, one on either side of the attachment and these require two operators. This larger style of mill requires a special bar which allows the two chainsaw heads to be attached at either end. The width of the plank that can be cut is determined by the length of the bar, up to 34 inches (86 cm) so for logs having a large diameter, the longer bar is necessary. Also a special chain is designed to make rip cuts rather than the usual chainsaw chain which is for cross-cutting.[3]

For the first cut, a pair of rails or a plank are usually attached to the log to give the mill attachment a reference surface to guide it or other commercially made jigs are available such as a timberjigs. Subsequent cuts are made using the surface of the previous cut as the guide.

Alaskan mills are relatively cheap to purchase compared to other types of portable sawmill and are the most portable type of powered sawmill. They are therefore popular with hobbyist woodworkers who have access to felled timber.

See also

References

  1. ^ Malloff, Will, and Beth Erickson. Chainsaw lumbermaking. Newtown, Conn.: Taunton Press, 1982. Print.
  2. ^ Gehring, Abigail R.. The back to basics handbook: a guide to buying and working land, raising livestock, enjoying your harvest, household skills and crafts, and more. New York, NY: Skyhorse Pub., 2011. Print.
  3. ^ Vol. 212, No. 6 Jun 1978, Page 89Popular ScienceLopez, Barry. "Mill Lumber With Your Chainsaw".
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.