World Library  
Flag as Inappropriate
Email this Article

Bevel

Article Id: WHEBN0001970281
Reproduction Date:

Title: Bevel  
Author: World Heritage Encyclopedia
Language: English
Subject: Woodworking, Hypodermic needle, Miter joint, Bossi-Bonomi Pedaliante, Wood
Collection: Angle, Woodworking
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Bevel

Side views of a bevel (above) and a chamfer (below)

A bevelled edge refers to an edge of a structure that is not perpendicular to the faces of the piece. The words bevel and chamfer overlap in usage; in general usage they are often interchanged, while in technical usage they may sometimes be differentiated as shown in the image at right. A bevel is typically used to soften the edge of a piece for the sake of safety, wear resistance, or aesthetics; or to facilitate mating with another piece.

Contents

  • Applications 1
    • Cutting tools 1.1
    • Graphic design 1.2
  • Glass and mirrors 2
  • Geology 3
  • Sports 4
  • Cards 5
  • Semiconductor wafers 6
  • See also 7
  • References 8
  • External links 9

Applications

Cutting tools

Most cutting tools have a bevelled edge which is apparent when one examines the grind. Bevel angles can be duplicated using a sliding T bevel.

Graphic design

Bevel filters in Inkscape

Typographic bevels are shading and artificial shadows that emulate the appearance of a 3-dimensional letter. The bevel is a relatively common effect in graphic editors such as Photoshop. As such, it is in widespread use in mainstream logos and other design elements.

Glass and mirrors

Bevelled edges are a common aesthetic nicety added to window panes and mirrors.

Geology

Geologists refer to any slope of land into a stratum of different elevation as a bevel.[1]

Sports

In waterskiing, a bevel is the transition area between the side of the ski and the bottom of the ski. Beginners tend to prefer sharp bevels, which allow the ski to glide on the water surface.[2]

Cards

With a deck of cards, you can slide the top portion back so that the back of the deck is at an angle. This can be used in card tricks.

Semiconductor wafers

In semiconductor industry, the slanted or rounded region between front (or bottom) side of wafer and edge of the wafer is defined as bevel region.[3]

See also

References

  1. ^ Anvil Point – Some examples of bevels in landscape. Retrieved January 26, 2007.
  2. ^ About.com or Goode Water Skis. Retrieved January 26, 2007.
  3. ^ http://www.prostek.com/ch_data/Semiconductor%20Wafer%20Edge%20Analysis.pdf

External links


This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.