World Library  
Flag as Inappropriate
Email this Article

Active laser medium

Article Id: WHEBN0000040692
Reproduction Date:

Title: Active laser medium  
Author: World Heritage Encyclopedia
Language: English
Subject: List of laser articles, Laser, Ruby laser, Laser diode, Dopant
Collection: Laser Gain Media, Laser Science
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Active laser medium

The active laser medium (also called gain medium or lasing medium) is the source of optical gain within a laser. The gain results from the stimulated emission of electronic or molecular transitions to a lower energy state from a higher energy state previously populated by a pump source.

Examples of active laser media include:

In order to lase, the active gain medium must be in a nonthermal energy distribution known as a population inversion. The preparation of this state requires an external energy source and is known as laser pumping. Pumping may be achieved with electrical currents (e.g. semiconductors, or gases via high-voltage discharges) or with light, generated by discharge lamps or by other lasers (semiconductor lasers). More exotic gain media can be pumped by chemical reactions, nuclear fission, or with high-energy electron beams.[7]

Contents

  • Example of a model of gain medium 1
    • Cross-sections 1.1
    • Steady-state solution 1.2
    • Identities 1.3
    • Efficiency of the gain medium 1.4
  • See also 2
  • References and notes 3
  • External links 4

Example of a model of gain medium

Fig.1. Simplified scheme of levels a gain medium.

A universal model valid for all laser types does not exist.[8] The simplest model includes two systems of sub-levels: upper and lower. Within each sub-level system, the fast transitions ensure that thermal equilibrium is reached quickly, leading to the Maxwell–Boltzmann statistics of excitations among sub-levels in each system (fig.1). The upper level is assumed to be metastable. Also, gain and refractive index are assumed independent of a particular way of excitation.

For good performance of the gain medium, the separation between sub-levels should be larger than working temperature; then, at pump frequency ~\omega_{\rm p}~, the absorption dominates.

In the case of amplification of optical signals, the lasing frequency is called signal frequency. However, the same term is used even in the laser oscillators, when amplified radiation is used to transfer energy rather than information. The model below seems to work well for most optically-pumped solid-state lasers.

Cross-sections

The simple medium can be characterized with effective cross-sections of absorption and emission at frequencies ~\omega_{\rm p}~ and ~\omega_{\rm s}~.

  • Let ~N~ be concentration of active centers in the solid-state lasers.
  • Let ~N_1~ be concentration of active centers in the ground state.
  • Let ~N_2~ be concentration of excited centers.
  • Let ~N_1+N_2=N~.

The relative concentrations can be defined as ~n_1=N_1/N~ and ~n_2=N_2/N~.

The rate of transitions of an active center from ground state to the excited state can be expressed with ~ W_{\rm u}= \frac{I_{\rm p}\sigma_{\rm ap}}{ \hbar \omega_{\rm p} }+\frac{I_{\rm s}\sigma_{\rm as}}{ \hbar \omega_{\rm s} } ~ and The rate of transitions back to the ground state can be expressed with ~W_{\rm d}=\frac{ I_{\rm p} \sigma_{\rm ep}}{ \hbar \omega_{\rm p} }+\frac{I_{\rm s}\sigma_{\rm es}}{ \hbar \omega_{\rm s} } +\frac{1}{\tau}~, where ~\sigma_{\rm as} ~ and ~\sigma_{\rm ap} ~ are effective cross-sections of absorption at the frequencies of the signal and the pump.

~\sigma_{\rm es} ~ and ~\sigma_{\rm ep} ~ are the same for stimulated emission;

~\frac{1}{\tau}~ is rate of the spontaneous decay of the upper level.

Then, the kinetic equation for relative populations can be written as follows: ~ \frac {W_{\rm u}+W_{\rm d}} ~, ~ n_1=\frac{W_{\rm d}}{W_{\rm u}+W_{\rm d}}.

The dynamic saturation intensities can be defined: ~ I_{\rm po}=\frac{\hbar \omega_{\rm p}}{(\sigma_{\rm ap}+\sigma_{\rm ep})\tau} ~, ~ I_{\rm so}=\frac{\hbar \omega_{\rm s}}{(\sigma_{\rm as}+\sigma_{\rm es})\tau} ~.

The absorption at strong signal: ~ A_0=\frac{ND}{\sigma_{\rm as}+\sigma_{\rm es}}~.

The gain at strong pump: ~ G_0=\frac{ND}{\sigma_{\rm ap}+\sigma_{\rm ep}}~, where ~ D= \sigma_{\rm pa} \sigma_{\rm se} - \sigma_{\rm pe} \sigma_{\rm sa} ~ is determinant of cross-section.

Gain never exceeds value ~G_0~, and absorption never exceeds value ~A_0 U~.

At given intensities ~I_{\rm p}~, ~I_{\rm s}~ of pump and signal, the gain and absorption can be expressed as follows: ~A=A_0\frac{U+s}{1+p+s}~, ~G=G_0\frac{p-V}{1+p+s}~,

where ~p=I_{\rm p}/I_{\rm po}~, ~s=I_{\rm s}/I_{\rm so}~, ~U=\frac{(\sigma_{\rm as}+\sigma_{\rm es})\sigma_{\rm ap}}{D}~, ~V=\frac{(\sigma_{\rm ap}+\sigma_{\rm ep})\sigma_{\rm as}}{D}~ .

Identities

The following identities[9] take place: U-V=1 ~ , ~ A/A_0 +G/G_0=1~.\

The state of gain medium can be characterized with a single parameter, such as population of the upper level, gain or absorption.

Efficiency of the gain medium

The efficiency of a gain medium can be defined as ~ E =\frac{I_{\rm s} G}{I_{\rm p}A}~.

Within the same model, the efficiency can be expressed as follows: ~E =\frac{\omega_{\rm s}}{\omega_{\rm p}} \frac{1-V/p}{1+U/s}~.

For the efficient operation both intensities, pump and signal should exceed their saturation intensities; ~\frac{p}{V}\gg 1~, and ~\frac{s}{U}\gg 1~.

The estimates above are valid for a medium uniformly filled with pump and signal light. The spatial hole burning may slightly reduce the efficiency because some regions are pumped well, but the pump is not efficiently withdrawn by the signal in the nodes of the interference of counter-propagating waves.

See also

References and notes

  1. ^ Hecht, Jeff. The Laser Guidebook: Second Edition. McGraw-Hill, 1992. (Chapter 22)
  2. ^ Hecht, Chapter 22
  3. ^ Hecht, Chapters 7-15
  4. ^ Hecht, Chapters 18-21
  5. ^ F. J. Duarte and L. W. Hillman (Eds.), Dye Laser Principles (Academic, New York, 1990).
  6. ^ F. P. Schäfer (Ed.), Dye Lasers, 2nd Edition (Springer-Verlag, Berlin, 1990).
  7. ^ Encyclopedia of laser physics and technology
  8. ^ A.E.Siegman (1986). Lasers. University Science Books.  
  9. ^ D.Kouznetsov; J.F.Bisson, K.Takaichi, K.Ueda (2005). "Single-mode solid-state laser with short wide unstable cavity".  
  • [1] A.saharn Lasing action

External links

  • Gain media Encyclopedia of Laser Physics and Technology
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.