World Library  
Flag as Inappropriate
Email this Article

Power attenuator (guitar)

Article Id: WHEBN0006325205
Reproduction Date:

Title: Power attenuator (guitar)  
Author: World Heritage Encyclopedia
Language: English
Subject: Isolation cabinet (guitar), Attenuator (electronics), Outline of guitars, Distortion (music)
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Power attenuator (guitar)

Power attenuator (THD Hot Plate) on Marshall 1959 Super Lead Plexi

In conjunction with an electric guitar amplifier, a power attenuator is used to divert and dissipate some or all of the amplifier's excess or unneeded power in order to reduce the volume of sound produced by the speaker.

Explanation

With tube guitar amplifiers, it is often desirable to produce distortion by overdriving the output stage. Under such a condition, the amplifier will produce at or near its maximum output power. The resulting volume level, however, may be considered unsuitable for many playing conditions. By reducing the amount of power delivered to the speaker, power attenuators reduce to desired levels the volume of sound produced by the amplifier, without altering the quality of the tone that is being sought.

The most common approach to power attenuation is the 'power soaker' approach. In a 'power soaker', a portion of the power is absorbed by the power attenuator (which is placed in circuit between the output transformer and the guitar speaker), while the remaining portion of the output power is directed to the speaker. An example of a common type of attenuator circuit is the L pad. A variable L pad is a power divider circuit that is designed to operate with a load in such a way as to provide an adjustable level of power to a speaker while maintaining a constant load impedance on the amplifier. [1]

A different approach, using a Variac or a power scaling circuit, reduces the B+ supply voltage available to the power tubes thus producing power tube distortion at a reduced level such that all available output power is sent to the guitar speaker. The Variac method is not without risk, as the reduced heater voltage applied to the tubes can damage the filament and/or cathode if not operated within the manufacturer's specifications. In a power scaling circuit, by decreasing just the B+ plate voltage, the cathode bias and screen grid voltage decrease proportionately, while the filament voltage stays constant. However the term power attenuator may be a misnomer for this type of power control because lowering B+ voltage tends to increase distortion, whereas according to convention, an attenuator should not introduce distortion.[2]

Power Damping is a method of output level control that involves the phase inverter and a potentiometer. The potentiometer allows that stage to be overdriven at reduced output similar to a Post Phase Inverter Master Volume (PPIMV) control.

Description

A power attenuator can be either purely resistive, or mostly resistive and partly reactive. The original guitar amp power attenuator, the Altair Attenuator, was primarily resistive, used a rotary switch to select taps on a toaster coil with low inductance windings. Another early model, simply called 'Power Attenuator' by Active Guitar Electronics, used continuously variable power rheostats. Other models, such as the Marshall Power Brake, add some electrical inductance or capacitance to the electrical load (including fans, light bulbs and coils). There is debate about whether reactive attenuators do a better job of preserving a guitar amplifier's tone.

A guitar amplifier power attenuator may also offer a line-level output jack for sending the distortion-processed signal through an effects chain, to a recording console, or for the purpose of re-amplifying signal through a larger or smaller amplifier.

If the amplifier is designed to accommodate being driven continuously at full power, the use of an attenuator will neither increase nor reduce the potential of damage to the amplifier. An early guitar amplifier to include a power attenuator was the Jim Kelley amplifier, which came with its own L-pad type attenuator. Some production attenuators are the Scholz Power Soak,[3] the Marshall Power Brake, THD Hot Plate, Weber MASS, and ARACOM.

See also

References

  1. ^
  2. ^
  3. ^

External links

  • Jedistar Attenuator Page
  • Adam's amps - Basic attenuator circuits
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.